A Comprehensive Guide to Pool Table Refelting: A Step-by-Step Process

A Comprehensive Guide to Pool Table Refelting: A Step-by-Step Process

29 February 2024
 Categories: , Blog

A pool table is more than an object—it's an investment that brings people together and creates lasting memories. Over time, however, wear and tear can take its toll, leading to the need for refelting. This blog provides a step-by-step process for pool table refelting, ensuring this valuable piece of entertainment maintains its charm and functionality.

Steps Involved in Pool Table Refelting

Step 1: Remove Old Felt

Using a staple remover or screwdriver (depending on how the felt is attached to the table), carefully remove all the staples and screws holding the old felt in place. Be sure to keep track of where each piece of felt came from, as this will make it easier when it's time to put the new felt on.

Step 2: Clean and Prepare Playing Surface

After removing all the old felt, use a pool table brush to remove any dust or debris from the playing surface. Then, clean the surface with a mild soap and water solution, making sure to dry it thoroughly before moving on to the next step.

Step 3: Lay Down New Felt

Carefully lay down the new felt over the playing surface, ensuring that it is smooth and free of wrinkles or bubbles. It's also essential to have enough felt to cover the edges, as this will make for a professional-looking finish.

Step 4: Stretch and Staple Felt

Using a staple gun, stretch the felt tightly over the playing surface, starting from the center and working your way outwards. Make sure that the felt is evenly stretched and that there are no wrinkles or bubbles. Use plenty of staples to secure the felt in place, making sure to staple along the edges as well.

Step 5: Trim Excess Felt

Once the felt is securely in place, use a utility knife to trim any excess felt hanging over the edges. This will give your pool table a clean and professional look.

Step 6: Adhere Felt to the Rails

Using a spray adhesive, carefully apply a thin layer to the backside of the felt on each rail. Then, press the felt onto the rail and hold it in place for a few seconds to ensure proper adhesion. Repeat this process for all four rails.

Step 7: Trim Excess Felt from Rails

After the adhesive has dried, use scissors to trim any excess felt hanging over the edges of the rails. This will give your pool table a neat and finished look.

Pool table refelting may seem like a daunting task, but by following these simple steps, you can easily give your table a new lease on life. So, gather your tools and materials and get ready to enjoy countless more games on your newly refelted pool table.

For more information, contact a professional pool table refelting service in your area.

About Me
Killer Repair Tips to Help Take Care of Your Home

When you own a home, it is essential to know how to take care of your home. It is essential to know how to handle repairs when things get damaged and broken, which will happen when you own a home. At Killer Repair, we are here to provide you with advice so that you know when you should get things serviced when to call in the professionals, and when you should try to handle projects on your own. Our objective is to allow you to approach all your home repair projects with confidence through our detailed articles, which are full of tips and advice to point you in the right direction with your home repair projects.