Got Mud? How To Clean Up After A Mud-Soaked Flood
If your home sustained damage from seasonal flooding, you can expect some muddy water. In most cases, seasonal flooding contains a lot of mud and debris. Once the water recedes, you'll find a thick layer of mud throughout your home. Unfortunately, mud can be more difficult to remove than standing water. That's why you need to take extra care during the clean-up. If your home is filled with mud, read the list provided below. Here are four steps to get you started on the remediation.
Call a Remediation Service
If you're trying to restore your home to pre-flood condition, you need to start with a remediation service. This is especially important whenever there's the presence of mud. Mud can be difficult to remove, especially once it gets into the carpet fibers, or behind the drywall. To make sure all the mud is removed, hire a water damage remediation service to handle the bulk of the project.
Gather the Right Boots
If you want to get a headstart on the clean-up, don't forget to wear the right boots. If you've ever cleaned up a water flood, you might not have worn boots. Unfortunately, you can't take that approach when you're dealing with mud. That's because there could be sharp objects, or other hazards hiding in the mud. To ensure adequate protection, start with skid-proof wading boots. The skid-proof soles will ensure solid footing and will prevent puncture wounds. The rubber material will keep your feet dry. If there are exposed wires under the mud, the rubber will keep you grounded.
Measure the Water Levels
If you're going to get started on the cleanup, take the time to measure the water levels. If the water has already receded, you can measure the watermarks on the walls. If the watermarks are above the electrical outlets, go ahead and turn the power off to the house. That step will protect you from electrical injuries. Once you've assessed the water levels, you can move on to the next step, which is the removal process.
Start the Removal Process
If your home is filled with mud, you'll need to remove a few things before the remediation process can move forward. Begin by removing the baseboards from your home. That way, ventilation can get behind the walls. If your drywall was affected, you'll want to remove the wet sections. The faster you remove those sections, the faster the drying process can begin. Once you've taken these steps, the remediation service crew can take over.
Reach out to a company like ServiceMaster Restore for more information.
